Before charging your phone, connect the appropriate adaptor to the charger body
by sliding the socket adaptor into the charger body until the retaining catch clicks
into place.
To remove the socket adaptor from the charger body, depress the retaining catch
with your thumb and slide the adaptor off the charger body.
Caution:
Never charge your Chairman phone when the phone or the connector at
the base of the phone is damp or wet.
1. Insert the smaller end of the USB cable into the micro USB port on the base of
the phone.
2. Insert the larger end of the micro USB cable into the charger body and plug the
charger into an appropriate power source.
Note:
The charger provided is for indoor use only.
or
Connect the larger end of the USB cable into a USB port on a computer.
Note:
When using a computer to charge your Chairman phone, ensure that
the computer is turned on and active rather than in sleep or standby
mode, to avoid discharging the phone’s battery rather than charging it.
3. When the phone is fully charged, disconnect it from the charger and disconnect
the charger from the power source.
If you prefer, you can charge your Chairman phone using the docking station. For
details see
Using your docking station
on page 29.
Switching your phone on and off
Switch the phone on and off using the P
OWER
/E
ND
key on the top right of the
keypad.
18
Содержание Chairman
Страница 1: ......
