Enjoy your original guitar tone
with greatly reduced guitar noise and hum!
To complete the fitment you may wish to de-solder the volume pot to output
jack wires and also the bridge earth wire and feed them through the centre of
the NRS module and re attach so as to have tidier wiring.
Now de-solder the black pickup ground wires from the NRS and slip on the
supplied heat shrink tube, re-solder and shrink the tube with heat. The NRS
module is flexible and can easily be moulded to the shape of the control cavity
and inserted flush with the top surface of the guitar body. FIG 2
Patent
@ulbrickmusic
Ulbrick Music
FIG 2
