REMOTE CONTROL ARM/DISARM CHIRP
#
When arming with the portable remote
control, the factory setting causes the
Console to “chirp” once when armed, twice
when disarmed, and three times when
arming with sensors bypassed.
#
Alternately, these chirps can be silenced.
#
If these chirps are silenced, it is
recommended to program the Home
Automation Output to be active when the
system is armed, so a light can be triggered
displaying the arming status of the Console.
#
The Console must be in Learn Mode to
make this change.
Exit Learn Mode when all programming
changes are complete.
HOME AUTOMATION ACTIVATION TONE
#
The factory setting causes the Console to
sound a “bing” when the Home Automation
Output is activated by pressing the [
AUTO
]
key, or when it’s triggered with a two-button
remote control.
#
Alternately, this sound can be silenced.
#
The Console must be in Learn Mode to
make this change.
Exit Learn Mode when all programming
changes are complete.
33 OF 40
PROGRAMMING STEP #74
PROGRAM
STORE PROGRAM
0 FOR BING TONE OFF
1 FOR BING TONE ON
PROGRAMMING STEP #73
PROGRAM
STORE PROGRAM
0 FOR CHIRPS OFF
1 FOR CHIRPS ON
MANUAL,OWNERS,DF-16K
Linear P/N: 210771 C
Material: 20# White Mead Bond with 60# White Coated Cover
Ink: PMS 554 (Dark Green)
Size: 8.500" x 5.500"
Scale: 1-1
31
