REMOVING SENSORS FROM THE SYSTEM
#
If a previously learned sensor isn’t going to
be used with the system anymore, it should
be removed from the Console’s memory.
#
Start with the Console in Off Mode.
#
Enter your secret code and press the [
LEARN
]
button.
Q
A “gong” and five “beeps” will sound.
Q
The sensor status indicators will light for
each sensor programmed into the Console.
Enter the sensor number (from 01-16) that
you want to remove (you must enter two
digits, example: 5 = 05)
Q
The sensor indicator light will flash for the
sensor number selected.
Press the [
TEST
] button.
Q
A single “bing” tone will sound when the
sensor has been removed and the sensor
status indicator will turn off.
Exit Learn Mode by holding the [
OFF
] button
for three seconds.
MAKING A SENSOR A 24-HOUR DOOR CHIME
#
Sensors can be programmed to cause the
Console to chime any time they’re activated.
#
Chime-only sensors will not be able to
trigger the alarm in any Console mode.
#
The sensor must have already been learned
by the Console (see “Adding sensors to the
System” for details).
Start with the Console in Off Mode.
Enter your secret code and press the [
LEARN
]
button.
Q
A “gong” and five “beeps” will sound.
Q
The sensor status indicators will light for
each sensor programmed into the Console.
Enter the sensor number from 01-16 (you
must enter two digits, example: 5 = 05)
Q
The sensor indicator light will flash for the
sensor number selected.
Press [
HOME
], 8, then [
AWAY
]. A “bing” tone
will sound.
Exit Learn Mode by holding the [
OFF
] button
for three seconds.
25 OF 40
START IN OFF
YOUR
SECRET
CODE
1 GONG &
5 BEEPS
SENSOR
NUMBER
TO REMOVE
DONE
TEST
1 BING
START IN OFF
YOUR
SECRET
CODE
1 GONG &
5 BEEPS
SENSOR
NUMBER
FOR CHIME
DONE
HOME
1 BING
TU
V
8
AWAY
MANUAL,OWNERS,DF-16K
Linear P/N: 210771 C
Material: 20# White Mead Bond with 60# White Coated Cover
Ink: PMS 554 (Dark Green)
Size: 8.500" x 5.500"
Scale: 1-1
23
