9
Low temperature start delay
(When the internal temperature
of charger is between -20 to -30
° C, the charger will delay
starting for 1~2 minutes)
R-G-Y-Y -Y-Y-Y-Y-Y-Y---
Note
：
1."-" represents led that does not light for 0.5s, a color word represents that
the LED of this color lights for 0.2s.
2. R --red G —green Y—yellow
IX Methods of Operation
(1) Connect the output terminal of the charger to the battery terminal
(2) Connect the input plug of the charger to AC power socket until the charger turns into normal charging process (observe the LED Indicator), then Charger
will automatically charge the batteries. When fully charged, the charger will automatically shut down, and display ‘full power’.
(3) If observed the battery become overheating or ballooning during charging process, you should stop the charger immediately by unplug the plug from the
AC socket.
X Appearance and Installation Dimensions
CH4100 Series High Efficiency Intelligent Charg...
http://www.ukeasypower.com/En/Product_Detail....
6 of 8
11/19/2015 11:13 AM
