Installation Hints:
1.
Need to first WDT-110(Wireless DI Transducer) of Dry contact input signal wire, with the
industrial or household use of the various warnings dry contact sensor connected before use.
2.
WDT-110(Wireless DI Transducer) leads
two features excellent line and described as follows
:
a. Black wire Signal input (negative)
b. Red wire Signal input (positive)
3. With a CX-96R (Carbon monoxide detectors) devices as an example, the wiring diagram that
is as follows:
4.
The WDT-110(Wireless DI Transducer) input signal properly then after the loop, and then
press the SET button of WDT-110, Then press the setting button of WR-110(Wireless repeater)
bottom. Wait for 30 seconds to 1 minute. If LED indicator light flash three times that means
linking success. If LED indicator light flash two times that means fail.
5.
Join to link with Gateway, please reference user manual of WCC-110 (Wireless console
controller).
6.
Foundation stop plate can be fixed on the pillar approach, the fixed as follows plans:
