Troubleshooting:
1.
Problem:
When link with WR-110 (Wireless repeater), there is no display of LED
indicator light for WDT-110 (Wireless DI Transducer) to flash two or three times.
Solution
: a. Need to confirm the detection of the external dry contact output of the circuit
wiring is correct.
b. May be not press set button, need to link with repeater again.
c.
If the above handles are invalid, please contact with
agency.
2. Problem:
Unable to link with WR-110 (wireless repeater).
Solution:
a. It needs to confirm the distance between WDT-110 (Wireless DI Transducer)
and WR-110 (Wireless repeater). Wireless connects in non-camouflage straight
line effective range 10 meters. May pull closer between both distance tests to
have a look first, whether to have the improvement segment condition.
Specification:
Wireless DI Transducer
Model No.
WDT-110
Electrical Specification
Transmit Frequency
2.4GHz
Modulation GFSK
Transmit Power
0 dBm
Channel spacing
1 MHz
Channel NO.
81 Channel(2401~2481Mhz)
Range of operation
10 meters
Operating voltage
3.0V DC
Current (typical)
Working:14mA Peak
Standby:1 uA Max
Battery Type
CR2032
Battery Quantity (PCS)
1
Input Signal
Dry contact*1
Display Type
Red LED indicator
Operation Interface
Push Switch
Environmental Requirement
Operating temperature
-20°C to 60°C
Storage temperature
-20°C to 70°C
Humidity
90% RH Max. Non-Condensing
Mechanical Specification
Dimension (WxHxD, mm)
40x80x22
Weight (No Battery)
35g
Weight (Include Battery)
38g
Pin Assignment
Pin 1- (Red)
Dry contact Input (Positive)
Pin 2- (White)
Dry contact Input (Negative)
