MSR213U Programmer’s Manual
PM072 Rev. A
1-2
Default interface Configuration Working
1. Detach the device from USB port.
2. Short Pin3 & Pin4 and attach the device to a USB port.
3. The device will beep twice and the green LED will turn on.
4. The device will work under default setting condition as below:
a). HID Keyboard
b). Keyboard country is U.S.
As soon as open the Pin3 & Pin4 and re-attach the USB connector, the device will work as
user’s previous settings.
Solution for Firmware Corrupting
1. Detach the device from USB port.
2. Short Pin1 & Pin2 and attach the device into a USB port.
3. The LED will turn amber indicating that the device is into firmware download mode.
4. Execute MSR213U Download Application Program to download proper file into the
device.
5. When the download process has accomplished, open the Pin1 & Pin2 and re-attach the
USB connector.
6. The LED will turn green if download process is success.
For firmware download applications, please contact UIC local representative or sales office.
Transmitting Data Block of Tracks
Each track could be divided into 1 to 3 blocks for transmission and each block can be set as
different card types and character numbers. If the set data is different from the data after
swiping, the reader will transmit completed data without limitation. The section 7 Memory
Map contains an explanation of setting blocks.
