MSR213U Programmer’s Manual
PM072 Rev. A
5-4
95 6E
Report Count (2)
82 02 01
Input (Data, Var, Abs, Bit Field)
09 31
Usage (Output Data)
95 6E
Report Count (328*)
09 32
Input (Data, Var, Abs, Bit Field)
95 6E
Usage (Command Message)
82 02 01
Report Count
09 20
Feature (Data,Var, Abs, Buffered Bytes)
96 50 03
C0
End
Collection
CARD DATA
Card data is only sent to the host on the Interrupt In pipe using an Input Report. The device
will send only one Input Report per card swipe. If the host requests data from the device
when no data is available, the device will send a Nak to the host to indicate that it has nothing
to send. When a card is swiped, the Input Report will be sent even if the data is not decodable.
The following table shows how the input report is structured.
I Mode
M Mode
Offset Usage
Name
0
T1 decode status
1
T2 decode status
2
T3 decode status
3
T1 data length
4
T2 data length
5
T3 data length
6
Card encode type
7, 8
Total Output Length
9-508 Output
Data
Offset Usage
Name
0
Track 1 decode status
1
Track 2 decode status
2
Track 3 decode status
3
Track 1 data length
4
Track 2 data length
5
Track 3 data length
6
Card encode type
7 – 116
Track 1 data
117 – 226 Track 2 data
227 - 336 Track 3 data
TRACK 1 DECODE STATUS
Bits 7-1
0
Value Reserved Error
