CX6162/66
A
SSEMBLY
14
4
Assembly
4.1
General assembly instructions
Before assembling the CX616x knob cylinder in a fire/smoke-resistant door,
please check the fire certification to ensure conformity.
Carry out the assembly necessarily with the door open.
Ensure that the latches or seals fitted to the door do not hinder the proper
operation of the CX616x.
Ensure that the knob cylinder
does not protrude and prevent the door from
swinging freely.
Before assembling the knob cylinder, always check if the components can
move freely.
After assembly, check the function with the door open.
4.2
Assembly
Insert the cylinder housing along with the electronic knob into the lock.
Tighten the fixing screw by hand, do not use a battery-operated screwdriver
with a high torque.
The cylinder body must not project outside its enclosing fitting by more than 1 to
3 mm, but it should not also be installed sunk in the upholstery.
The mechanical knob is assembled to the end of the cylinder housing and
secured using the grub screw. In the process, ensure that the axis of rotation,
as well as the seating of the knob have a flat surface, both of which need to
be flush with each other.
