Umwelt-Geräte-Technik GmbH
| Eberswalder Str. 58 | D-15374 Müncheberg | Tel.: +49 (0) 33 43 2 - 89 575 |
•
When installed the sensor must not be moved. By that the antennas could be twisted
or bend leading to inaccurate measurement values and damage of the antennas.
•
For correct survey of the temperature the temperature sensor has to be in contact
with the soil for at least 6 minutes.
For the measurement a connection to the sensor is established using the app. Following
the measurement can be started through the app. After finishing the measurement, the
Bluetooth connection should be disconnected.
To ensure the longest possible measurement time the sensor should be charged before
every use. Therefore, open the cap of the charge socket (bajonet cap) and connect the
probe to either the USB-port of your PC or a socket using the provided cable and adapter.
7.
Data output
7.1.
App Installation
The app is already installed if you have acquired the smartphone together with the
UMP-1 sensor from UGT-GmbH. If you want to use your own, existing Android
smartphone you can install the app yourself. Two versions are available for this.
Installation directly from the smartphone (recommended)
1.
download the apk file from the following address:
http://appstore.ugt-online.de (internet access/WIFI required)
2.
Click on the downloaded file in the “Downloads” folder
3.
Select “install” and following the instructions on the screen
4.
After successful installation, click on the UMP-1 symbol in the app menu
Caution!
No moisture or dirt is allowed to get in the open charge socket. The degree of protection
IP67 of the probe only applies for proper closed charge socket.
