Instructions for use (rev 05/18)
e.ON SINTER
UGIN DENTAIRE
42
Before first sintering, user must launch a cleaner program preloaded in N° 40
In case of white dust into the mufle, user must remove it with a sweeper (no compressed air)
and also clean regularly platform and trays
Zirconia sintering temperatures are given as indicative by disc manufacturer. If necessary
these one can be adjusted from -15°C to +15°C around the final temperature recommanded
High translucency zirconia are very sensitives. To avoid and prevent crossed discoloration with
other zirconia brand or type, user must do regularly clean program (N° 40).
If liquid shades are used with staining technic, prosthetics units must be dry and preheated
with an infra red lamp or into an oven to prevent pollution into the eON Sinter, in following
zirconia and shades manufacturer recommandations.
White clusters can appear on the rods (heating elements) when differents brands or types of
zirconia are used. In this case user must clean mufle and rods with a special zirconia cleaner like
Nacera Clean (registered brand) with clean program N° 40.
Beads for sintering must be changed in any tray if a discoloration in yellow color appears.
8.
MAINTENANCE
To maintenance work and/or cleaning, e.ON SINTER must be :
-
disconnected from the main power supply,
-
at room temperature: wait the cooling after use (risk of burns and/or damage)
Except for cleaning the machine outside, e.ON SINTER needs no particular servicing operation.
Do not use abrasive, solvents or flammables products for cleaning (outside and inside).
Clean the machine outside with a soft, dry cloth.
Remove any traces on the screen with a soft cloth and a small amount of special glass cleaner.
Cleaning wipes for optic products can also be used.
Visual inspection of the support and the tray before use. If necessary, clean with a sweeper or a
soft, clean brush to remove any particles (dust). Do not use compressed air: risk of damage to
the accessories and the suspension of particles of the refractory material. If the support is
damaged or cracked: do not use and replace-it.
Clean regularly platform with a sweeper (no compressed air)
Regularly check the electrical contacts of the heating elements and tighten.
Do not introduce stranger objects inside the unit during the maintenance operations.
Do not spill liquid on the ventilation openings or inside the furnace: risk of electric shock.
Содержание e.ON SINTER
Страница 2: ......