UFO UFO-MCH/15, Руководство пользователя

Страница: 27 / 34

26
Step 3: Install into the wall 4 fi xing elements (for example,, screws).
Make it sure that they will provide a secured fi xation of the device
on the wall.
Step 4: Fix the mounting fi xation on the wall by means of four fi xers.
Step 5: Set the convector on the fi xators in the way, that 4 protrud-
ings would coincide with the corresponding holes available on the
back panel of the device (see Fig. 7).
Turn the fi xing plate, so that it would get into its place, and tighten
the screw.
To remove the device all the above steps shall be fulfi lled in the
reverse order.
4.3 Wheeled platform
List of the parts:
Wheels, 4 pieces. Fixers, 2 pieces.
Base, 2 pieces
Step 1 Step 2 Step 3
Step 4 Step 5 Step 6 Step 7
4.4 Connection to the power supply network
Для этогоThis device shall be powered from the electric mains of 220 to 240 V.
Please, before operating the device make it sure that the standard electric mains parameters
meet the requirements set up by the device manufacturer.
• Before switching the device make it sure that the power supply cord and the device itself have
no defects. In case of any damage available, you should address a specializing maintenance
centre to eliminate that. The device must not be connected to the electric mains before the
defects have been eliminated.
• The voltage in the mains shall be 220 to 240 Volts, check the connection to the automatic
Fig. 7