29
INSTALLATION, USE AND MAINTENANCE MANUAL
INSERTION AND RECHARGE OF THE PRODUCT TO MAKE THE FOG
In order to insert the cylinder, open the cylinder compartment panel using the supplied suction
cup. Position the base of the cylinder so that it can be inserted on the jack plate, then press the
upper part of the cylinder inward the machine. The cylinder will be positioned correctly when
the upper part is locked in its place after a small fixing click.
We recommend not to press the cylinder upwards to avoid the escape of the glycol inside it.
FIXING CLICK
BASIC ENTRY
RESET BUTTON
REFILL TO CONNECT
ON/OFF BUTTON
INITIAL PHASE
REPLACEMENT OF AN EMPTY CYLINDER (UFO L AND XL)
In order to ensure a correct rotation of the cylinders (to avoid that a cylinder remain unused for
a long time inside the device) the procedure will be as follows:
Remove the empty cylinder
Scaling the loaded cylinder in place of the empty one just removed;
Add the new charged cylinder in the vacated place
REPLACEMENT OF A REFILL
The procedure will be as follows:
Release the empty refill;
Hook the refill to the connector;
Make sure that the hitch was successful with a test shot.
