UFO LUNA SLP-3000M Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 16

UFO LUNA SLP-3000M Скачать руководство пользователя страница 5

CONNECTION – LUNA DMX

There are 3 connections required – the fibre port, the mains supply cable and the
DMX control cable. The fibre port should be connected first. Connect and secure the
fibreoptic connector into the collar and secure using the M5 locking screw.

Connect the PSU/driver to the DC input jack socket on the Luminaire. Plug the mains
plug into the electrical supply socket. Switch on power the led Indicator will
illuminate and the light source is ready for use. If no light is produced consult the
TROUBLESHOOTING section.

NOTE: THESE LIGHT SOURCES ARE NOT MAINS DIMMABLE

Connect up the DMX control cables to the Mini-XLR sockets on the rear of the light
source. The recommended plug for these sockets is Multicomp SVP556-TA. The pin
out details for the plugs are shown below. Either socket may be used as DMX in or
DMX out.

Universal Fibre Optics

5

NOTE: CONVERTORS ARE AVAILABLE FROM UFO

Mini XLR to RJ45
Mini XLR to normal 3 pin XLR

«
...
3
4
5
6
7
...
»

Содержание LUNA SLP-3000M

















Отзывы:

Нет отзывов