UFO LUNA SLP-3000M, Руководство пользователя, Страница: 2 / 16

INTRODUCTION
Thank you for purchasing this UFO light source.
Please read these instructions fully before connecting your unit to the electrical
supply, and keep them for future reference.
The UFO Luna range of light sources are suitable for use with either glass or PMMA
fibre optic harnesses.
This luminaire is powered by a 24V Power Supply Unit or 24V constant voltage driver.
IMPORTANT
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE. WHEN THE LIGHT
SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED.
TYPE Y ATTACHMENT: If the external flexible cable or cord of this luminaire or
associated PSU/driver is damaged. It shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person to avoid a hazard.
LOCATION: Do not locate this light source closer than 200mm from any flammable
surface.
CLEARANCE/VENTILATION: It is imperative that a gap of 200mm is left around the
unit. This is to allow air to circulate and prevent overheating. The location must
have free ventilation and must not have an ambient temperature higher than that
specified for the luminaire.
MOUNTING: This is a fixed luminaire. See separate mounting plate instruction on
Page 3 for fixing to surface.
WARNING: Never look directly into the Luminaire LED light source
Luna Light Source Range
2