
CONNECTION – LUNA M
There are 2 connections required – the fibre port and the mains supply cable. The
fibre port should be connected first. Connect and secure the fibre optic connector
into the collar and secure using the M5 locking screw.
Connect the PSU/driver to the DC input jack socket on the Luminaire. Plug the mains
plug into the electrical supply socket. Switch on power the led Indicator will
illuminate and the light source is ready for use. If no light is produced consult the
TROUBLESHOOTING section.
NOTE: THESE LIGHT SOURCES ARE NOT MAINS DIMMABLE
NORMAL OPERATION – LUNA M
Under normal operation the LUNA M light source can be dimmed manually using the
dimmer control on the rear of the unit.
Luna Light Source Range
4
Содержание LUNA SLP-3000M
Страница 15: ...Universal Fibre Optics 15...