background image

PADDLE TRIM

 

 - page 

19   

Installation Manual

3 - SAFETY WARNINGS

3.1 Safety rules during installation and use

The precautions and safety criteria given in this manual MUST BE STRICTLY OBSERVED. 

 

declines any responsibility in the event that the user does not observe them, and is not responsible 
for any type of negligence that may be committed during the use of the system.

  CAUTION

•  Putting hands on the inside of the steering wheel during navigation can be dangerous. Only 

give commands to the device keeping the hands on the outside of the steering wheel.

•  Do not modify or add devices to the system, without written authorisation or prior technical 

intervention by 

 showing the modification in the description of the intervention.

•  Do not use the equipment for a purpose different from that for which it was intended, as 

specified in the installation manual.

•  Do not allow non-specialised personnel to perform the installation.

DANGER

The system will work only with 12VDC/24VDC power. DO NOT INSTALL ON SYSTEMS WITH 
DIFFERENT VOLTAGES FROM THESE!

CAUTION

Any other applications apart from those shown in this manual ARE NOT ALLOWED.

Содержание PADDLE TRIM























Отзывы: