Installation Manual
page
18
-
PADDLE TRIM
2.3 Electrical connection
Connect the electrical conductors of the Paddle Trim as follows:
DANGER
The system will work only with 12VDC/24VDC power. DO NOT INSTALL ON SYSTEMS WITH DIFFERENT
VOLTAGES FROM THESE!
CAUTION
Power limits: the device can be used with a resistive load of up to 5A and/or a maximum inductive
load of 2A.
CAUTION
Once the electrical connections to the control device have been made, before attempting to drive
the boat, perform a verification test to ensure that the system responds correctly to the commands
given through the device.
White: normally open
Red: normally open
Black: common
