![background image](http://html1.mh-extra.com/html/ufesa/skipper/skipper_instruction-manual_3245591014.webp)
E N G L I S H
WE WOULD LIKE TO THANKS YOU FOR CHOOSING UFESA, WE WISH THE
PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.
WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE
PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.
DESCRIPTION
1 Blades
2 On switch
3 Digital display screen
4 Limit comb 3mm(a)/6mm(b)/9mm(c)/12mm(d)
5 USB charging cable
6 Brush
7 Lubricating oil
SAFETY INSTRUCTIONS
This device can be used by children aged 3
or over under supervision.
This device can
be used by children aged 8 years and
above and persons with reduced physical,
sensory or mental abilities or lack of
experience and knowledge if they are
supervised or have received proper
instructions regarding use of the device in a
safe manner and understand the dangers
involved. Children must not play with the
device. Cleaning and maintenance
operations to be performed by the user
must always be supervised.
This device can only be connected with the
USB interface (5VDC, Output Max 1A).
Follow the DEVICE CHARGE instructions
in order to charge it.
Follow the device BATTERY REMOVAL
instructions for removal of the batteries
from the device.
This appliance is intended for use at a
maximum altitude of 2000m above sea
level.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial or
industrial use under any circumstances.
Do not use the device on wet hair.
Do not use connect or disconnect the device to the mains with your hands or feet wet. Do
not use any accessories other than those supplied.
Do not use this device near to bathtubs, showers, sinks or other tanks that contain water.
The mains connection cable must not be tangled or wrapped around the product during
use. Do not pull on the cable to unplug it or use it to carry the product.
Do not wrap the cable around the device.
Proceed according to the cleaning section of this manual for cleaning. Do not use the
product on animals.
Unplug the product immediately from the mains in the event of any breakdown and
contact an authorised Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s Official Technical support service may carry out repairs or
procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and
void. Only an authorised technical support service centre may carry out repairs on this
product.
B&B TRENDS SL.
disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
CHARGING THE DEVICE
Before using your beard trimmer for the first time, charge for 2-3 hours, and charge 2
hours regularly. Ensure the product is switched off. First insert the plug on the end of the
USB charging cable lead into the unit (Fig. 1) and then connect the USB charging cable to
the USB interface. This appliance is suitable for 5V DC Max 1A charger, computer and
other power interface (Fig. 2), the charging indicator is red when the battery is charging
connecting the USB interface, the charging indicator is green when the battery is full.
Your hair clipper cannot be overcharged. However, if the product is not going to be used for
an extended period time (2-3 months), unplug it from the mains and store. Fully recharge
your hair clipper when you like to use it again.
To preserve the life of your batteries, let them run out every 2 months then recharge for
2-3 hours again.
INSTRUCTIONS FOR USE
Prior to turning the device on, select the desired comb guide (a,b,c or d) fitting it by pushing
forward in a proper way (fig 3-4). If the hand combing needs to be replaced, pull upwards
by hand. Open the bottom end of the comb lock and push forward (fig 5-6).
Choose between four levels of matching comb to cut hair of different lengths. The length
of the cut is indicated on each limit comb as follows:
HOW TO TRIM BEARD
For different beard styling please refer from Fig.7 to Fig.12
MAINTENANCE AND CLEANING
Unplug the product when you do not intend to use it for an extended period of time to
prolong its shelf-life. Allow the device to cool down prior to storage. Separate the tool head
from the body and use the cleaning brush to remove dust from the internal parts (Fig.13).
Apply a drop of oil on one of the edges of the blades for their maintenance, and turn on the
device for a few seconds to distribute it. This should be done when you notice a certain
amount of difficulty during the trimming operation (Fig. 14)
Ensure that the device is unplugged prior to cleaning it.
This device may only be cleaned with a damp cloth, and chemical products must never be
used for the same.
PRODUCT DISPOSAL
Содержание SKIPPER
