UFESA AE4522, Инструкция по эксплуатации

Страница: 13 / 40

13
Plug must be removed from socket-outlet before cleaning
or maintaining the appliance. Follow the device BATTERY
REMOVAL instructions for removal of the batteries from
the device.
IMPORTANT WARNINGS
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label. The mains connection cable must not be tangled or wrapped around the product during
use. Do not pull on the connection cord in order to unplug it. Do not use, connect or disconnect the
device to the mains with your hands or feet wet. Proceed according to the conservation and cleaning
section of this manual for cleaning. Unplug the product immediately from the mains in the event of
any breakdown or damage and contact an authorised Technical support service. In order to prevent
any risk of danger, do not open the device. Only qualified technical personnel from the brand´s Official
Technical support service may carry out repairs or procedures on the device. Any incorrect use or
improper handling of the product shall render the warranty null and void. Only an authorised technical
support service centre may carry out repairs on this product. This appliance is designed exclusively for
domestic use, in no case should be a commercial or industrial use. In case of misuse or tampering with
the product, it will be out of warranty. Do not use the appliance to vacuum liquids (water, etc), sharp ob-
jects (pins, pins, nails, glass, etc), incandescent objects (matches, cigarettes) Never use the turbobrush
to: Polish floors, suck (Liquids, wet or damp dust, hot ash, burning objects, such as cigarettes, matches,
sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass, etc), flour, cement, plaster,
printer or photocopier toner, etc. B&B
TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
BEFORE FIRST USE:
• Unpack all parts and check the items supplied are not damaged. Note: that the two nozzles may be
packed inside off each other.
• Charge up the battery (see below).
CHARGING UP THE BATTERY:
• Connect to the battery charge as the first point.
• Charge up the battery fully before first use. Approx. charge time 4-5 hours.
• Disconnect the charger from the mains power and then the device. Store the charger in dry. cool
place.