Instructions for Use
46
•
When the appliance or the model is fitted
with optional filters, we recommend that
these be left on regardless of the
function selected (
cooling
,
dehumidification, air purification) in order
to purify the air more effectively.
Note:
Due to the internal configuration of the
AA5500, models, air is also expelled
outdoors when the appliance is set to
the ventilation function. In order to
reduce the noise produced, it is
recommended that you remove the air
expulsion tube.
Heating (only on
AA5720
)
When set to position , the appliance
heats the air in the room until the
temperature set by the user is reached.
The air in the room is purified at the same
time.
•
Plug the appliance into the mains
electricity supply.
•
Put the air expulsion tube in the same
position as for dehumidification.
•
Select the heating function,
Fig. 28
.
•
Set the thermostat to the desired
temperature. When this temperature is
reached, the appliance turns itself off
automatically. It comes back on again
when the temperature drops 2-3ºC.
Warning!
Do not cover the air intakes or outlets
on your appliance!
Fig. 25
Fig. 26
Fig. 27
Fig. 28
•
This air director is not installed on the
appliance on
AA5720
models. The
manufacturer recommends that an air
director be previously installed in order to
distribute the air flow better. The director
is fitted as shown in the following figures.
