UEi CO95, Инструкция по эксплуатации

Страница: 6 / 12

6
11. BAT:
Displays estimated battery life.
• If battery voltage falls below a pre-set limit, the display flashes “ LOW BAT .” every 10 seconds.
OpErATINg INSTruCTIONS
BEFOrE uSINg EvEry TIME
Check for the following:
• The particle filter is not dirty
• The water trap and probe line are empty of water
• All hose and thermocouple connections are properly made
• The probe is sampling ambient FRESH air
• The water trap and drain plug are fitted correctly to the instrument
• The temperature probe is connected if required
AppLIANCE MEASurEMENTS
Place the CO95’s probe into the appliance’s sampling point. The ideal sampling point is at least two flue
diameters downstream of any bend.
Put the probe tip in the flue center. With balanced flue, make sure the probe is positioned far enough into the
flue so no air can “back flush” into the probe.
Make sure you do not exceed the meter’s operating specifications.
In particular:
• Do not exceed the probe’s maximum temperature
• Do not exceed the meter’s internal temperature operating range
• Do not put the meter on a hot surface
• Do not exceed the water trap’s levels
• Do not let the meter’s particle filter become dirty and blocked
Press “ hOLd ” first to “ freeze ” the readings before printing, then press “ prINT ”.
Boiler
2” 2”
D
2D
Taking an appliance test