Combu
stion Analy
zer
C165+
CO
C
O2
T
EM
P
PR
S
Status
L I N K
v3
Aux
O2/Eff
CO/CO2
Temp
Exch Test
ROOM CO
Combu
stion Analy
zer
C165+
CO
C
O2
T
EM
P
PR
S
Status
L I N K
v3
Aux
O2/Eff
CO/CO2
Temp
Exch Test
ROOM CO
BASIC CO/COMBUSTION ANALYSIS
Insert Flue probe into stack.
Adjust cone so end of the
probe is approximately at the
center of the stack.
NOTE:
You will have to drill a
hole at least 3/8”. Use appropriate
sealing method after testing.
Rotate selector dial to
O2/Eff
to view:
CO2
O2
Efgc
T1
Ta
(Status Bar - NAT GAS)
Fuel type can be changed via
or
STATUS
setting
Rotate selector dial to
CO/
CO2
to view:
CO
COa
LOSS
XAIR O2++
P
(Status Bar - NAT GAS)
Fuel type can be changed via
or
STATUS
setting.
Make any adjustments as
needed for proper
combustion and wait for
analyzer to display change
in readings. (Repeat as
necessary).
T2
T1
P2
P1
Once complete, remove probe from stack, allow analyzer to purge in fresh air until CO sensor
readings return to ZERO (0) and O
2
readings reading return to 20.9%.
Continue to the next test or power analyzer off by pressing
, if finished.
NOTE:
Print and store functions may be used at any time during testing.
T2
T1
P2
P1
