DIGITAL TERRESTRIAL TERMINAL
USER MANUAL
SETUP4: DTT, TV, VCR, Hi-Fi
NOTE: It is recommended that you remove the Mains supply to the Terminal
before connecting or disconnecting to or from the Digital Terrestrial
Network.
1
Connect the Antenna connector to the Aerial In socket of the Terminal. Connect
the Loopthrough Out socket of the Terminal to the RF In socket of the Terminal,
using the RF flylead supplied. (Refer to [1] on illustration below)
2
Using a RF flylead, connect the RF Out socket of the Terminal to the RF In
socket on the VCR. (Refer to [2] on illustration below)
3
Using the RF flylead supplied with the VCR, connect the RF Out socket of the VCR
to RF In socket on the TV. (Refer to [3] on illustration below)
4
If using a SCART-to-SCART cable (not supplied), connect the TV SCART connector
on the Terminal to the SCART connector on the TV. (Refer to [4] on illustration
below)
5
Using another SCART cable, connect the VCR SCART on the decoder to the
SCART connector on the VCR. (Refer to [5] on illustration below)
6
Connect the VARIABLE Left and Right Hi-Fi Audio Out connectors on the Terminal
to the Left and Right Audio connectors on the Hi-Fi. (Refer to [6] on illustration
below)
7
Switch Power to On.
8
Set the TV and VCR Scart Source and the TV and VCR Scart Video Output
using the TV installation option.
TV
VCR
Hi-Fi
Scart to Scart
RF In
RF Out
RF In Scart to Scart
Audio
Input
L
R
Connections in box used
if no Scart connectors
[1]
[2]
[3]
[4]
[5]
[6]
[1]
[6]
11
