manualshive.com logo in svg

UEC DSD 700, Руководство по эксплуатации

Поделиться
Скачать
UEC DSD 700 Скачать руководство пользователя страница 22

 22

       OPERATING INSTRUCTIONS

   DSD 700

Full Rescan

This facility is used when a new service becomes available. It is
recommended that this facility is used on a regular basis to upgrade
the services available to you .

1

Press MENU on the RCU.The Mains Menu options list is
displayed.

2

On the RCU, press      to highlight Organising Services.

3

Press OK to display Organising Services options list.

4

On the RCU, press      to highlight Full Rescan.

5

Press OK.
A message “

Do you want to start a Full Rescan

” is

displayed.

6

Press OK to confirm.
A scanning screen is displayed in which are listed the
operators, services and transport streams. After a period of
time, the previous service is automatically restored.

NOTE: The personal sort list is lost after a full rescan has

been performed.

Mail Messages

The Service Provider can send global or individual messages over
the air. When a message has been received, the yellow front panel

indicator will be illuminated and the  

    symbol displayed on

every menu screen.

To read the message do the following:

1

Press MENU on the RCU.
The Mains Menu options list is displayed.

2

On the RCU, press      to highlight Mail Messages.

3

Press OK. The Mail Messages screen is displayed.

4

Press OK to return to the Main Menu.

The front panel yellow indicator will be OFF and the mail symbol will
no longer be displayed.

Advanced Options

Selecting the Advanced Options on the Main Menu provides access
to important technical settings for the decoder and satellite dish
antenna.

Change Dish Installation

Important!

The installation settings should be set by a qualified
person.

Do not change any installation settings before carefully
noting the value of the setting you want to change and
ensuring that the new and old values are written down on
page 31. Incorrect settings will prevent the decoder from
operating correctly.

An installation PIN code must first be entered before the Change
Dish Installation and its sub-menus can be accessed. This measure
helps to prevent accidental changes to the set up. The PIN code is
9949. This number cannot be changed.

 LNB Configuration

Your decoder supports several LNB and network configuration
options. If your satellite dish installation does not include  a Universal
(dual) LNB set up to the factory default settings, it is recommended
that you consult your installer as to  your particular setup require-
ments.

Information on these options for the installer can be found on the
Manufacturer’s website:

http://www.uec.co.za

Set LNB Power

In most installations the correct setting for the LNB Power is “On”.
Certain special applications may require the setting to be “Off”.

To set the LNB Power “On” or “Off”, do the following:

1

Press MENU on the RCU.
The Main Menu options list is displayed.

2

On the RCU, press     to highlight Advanced Options.

3

Press OK.
The Advanced Options Menu is displayed, in which the Change
Dish Installation option is highlighted.

4

Press OK.
The PIN Code for Installation screen is displayed.

5

Type the PIN code 9949 using the keypad on the RCU. See
Note. After successfully entering the installation PIN, the Change
Dish Installation Menu is displayed, in which the LNB
Configuration option is highlighted.

NOTE: 9949 is the installation PIN code. A different PIN code  is

required for the Parental Guidance PIN .

6

Press OK.
The LNB Configuration Menu is displayed, in which LNB Setup 1
highlighted.

7

Press OK. The Set LNB Power screen is displayed.

8

Press OK to save ON setting, or press     to set the LNB power
to OFF.

9

Press OK to activate the setting.
The Change LNB Settings Menu is displayed.

10

Press EXIT to return to the previous menu or MENU to return to
the service.

LNB Setup

The LNB mode and  frequency or frequencies  must be appropriate for
the LNB installed on the satellite dish. The information is supplied with
the LNB. (The default setting is for a Universal (Dual) LNB.)

To set the frequency:

1

Repeat steps 1 to 6 of Set LNB Power (page 21).

2

Press      to highlight LNB Mode. (Default is Dual frequency.)

3

Press       to highlight  LNB Lo frequency. (Default setting is
9750.)

4

Press       to highlight  LNB Hi frequency. (Default setting is
10700.)

5

Press OK.
The  LNB Configuration menu screen is displayed. Press EXIT.

Содержание DSD 700

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды