1.12.1 Power On / Off
Power On
After connecting the DC IN jack, press the power button on the remote; the Player will boot up
and enter the home screen, then the power indicator will turn blue.
Power Off
Press the power button on the remote; the Player will enter standby mode and the power
indicator will turn red. To power off the Player, unplug the power cord.
1.12.2 Menu language
The Player’s system language can be set not only to English but to other languages as well.
You can select the language you want in the Setup menu, which will take effect immediately.
1.12.3 HDD Format
For users who wish to install a new SATA hard disk drive (HDD) into the Player, please refer to
Quick Installation Guide for HDD hardware installation. After the HDD installation, please
follow the steps below in order to format the hard disk on the Player:
Note: A password is needed when you try to format the HDD; the default password is set to
‘0000’. Please refer to ‘2.1.5 Miscellaneous’ to change password settings.
Step 1: Select
OK
on the
Warning
page, then press
OK
to confirm.
You will see this
message after you have installed the hard disk and powered on the Player.
