- 2 -
Folding open the bicycle rack
1. Take the bicycle rack (2) out of the bag (1).
2. Open the quick release clamp (6).
3. Fold up the rack frame (7) and close the quick release
clamp (6). If necessary, turn the quick release clamp (6)
clockwise if the rack frame (7) is too loose.
4. Fold out the wheel rails (8) and engage.
5. Fold out the tail lamps (9) and engage.
6. Swing the brackets (10 and 11) forward and slide along the rack
frame (7) into the required position.
7. Insert the number plate in the number plate holder (14). Turn
the locking pin (15) by 180° using a screw driver to prevent the
number plate from slipping.
Collapsing the bicycle rack
The bicycle rack (2) is collapsed in reverse order.
Note
If the quick release clamps cannot be closed, turn anticlockwise.
1
2
M+P-25A-0036
7
6
6
M+P-25A-0037
8
8
M+P-25A-0038
Attention
The plate number on the bicycle rack must match the plate
number of the vehicle and be clearly legible.
Note
To insert higher number plates, press the stoppers (arrows)
back and slide the plate into the number plate holder.
11
7
10
9
M+P-25A-0039
15
14
M+P-25A-0040
Basisträger_hoch.fm Seite 2 Dienstag, 8. März 2011 10:30 10
