uebe Visomat handy, Инструкция по эксплуатации

Страница: 19 / 55

english
C
EN-36 EN-37
english
C Operating the unit Operating the unit
The unit has a date/time function which you can activate where necessary. This
function is deactivated when the unit is delivered.
5. Activating and setting the date/time
To activate the date/time function, press the Start/Stop button and then
immediately, while the full display is visible, the Memory button. This function can
be deactivated at any time in the same way.
Activating the date/time function
Setting the date/time
The four-digit number representing the year appears in the
display first (Fig. 1). Press the Memory button to set the year.
Press the Start/Stop button to confirm the selected year and
proceed to setting the date.
Changing the date/time
To change the date/time function, take out a battery and wait
until the display goes blank. Now you can reactivate the date/
time function and reset the date and time again.
When the date/time function is activated, the time is also shown
in the display when the unit is switched off.
Set the month with the Memory button and confirm this with the
Start/Stop button. Set the day, hours and minutes in the same
way (Fig. 2, Fig. 3).
Fig. 1
Fig. 2
Fig. 3
Deactivating the date/time function
To deactivate the date/time function, press the Start/Stop button
and then immediately the Memory button.
The special double-preformed comfort cuff is easy to attach and provides for a
perfect fit during measurement. The materials used have been tested for skin
compatibility in accordance with ISO 10993.
• Expose your wrist, with the palm of your hand facing
upwards.
• Slide the unit over your wrist. Make sure the gap
between your wrist and the top edge of the cuff is
approx. 1 cm.
• Now pull the free end of the cuff tight and close the
cuff with the Velcro-type fastener.
6. Attaching the unit
Thanks to its optimised shape, the cuff fits very tightly to
prevent measurement errors.