uebe visocor HM50, Инструкция по эксплуатации

Страница: 32 / 47

EN-62
english
Operating the unit C
EN-63
english
Operating the unit
C
The measurement being completed is indicated by a
long beep. The determined values for systole, diastole,
and pulse are shown on the display.
•
The unit switches off automatically after about 3 minutes. •
Irregular pulse waves 9.
If the symbol for irregular pulse waves flashes after a meas-
urement, the unit has recorded irregular pulses during the
measurement. This can be set off by an irregular heartbeat
(arrhythmia), disturbance caused by movement, talking
or even breathing in deeply. The symbol is stored with the
respective measurement.
Using the memory 10.
Measured results are automatically stored in the memory. The memory can
store up to 60 results and the average value. When more than 60 measured
values have been stored, the oldest value (No. 60) is deleted to allow the
latest value (No. 1) to be recorded.
Recalling data
Press the Memory button to call up data. The average value
of the stored results is displayed with “A”.
When the Memory button is pressed again, the value meas-
ured last (No. 1) appears.
Press the Memory button repeatedly to call up further
measured values.
The actual measurement takes place with the start of
deflation. The “
♥
” symbol in the display flashes until the
pulse frequency is displayed.
•
blood pressure. The inflation stops with releasing the
button.