uebe visocor HM50, Инструкция по эксплуатации

Страница: 25 / 47

EN-48
english
Mode of operation A
EN-49
english
Safety instructions
B
visocor ® HM50 uses the oscillometric method for measuring blood pressure
and pulse rate.
Using the pressure variations caused by the pulse at falling cuff pressure,
the micro-computer calculates the values systole, diastole, and pulse. After-
wards, the cuff is deflated completely.
A measurement value memory stores the most recent 60 measurement
results in each case.
These instructions are intended to help you use the unit reliably and ef-
fectively. Keep the instructions together with the unit at all times. The unit
must be used in accordance with the methods detailed in these instructions
and may not be used for other purposes. Read these instructions carefully
before using the unit.
Important instructions for patients 1.
The unit is designed for non-invasive measurement of the systolic
and diastolic blood pressure on the wrist, as well as measurement of
the pulse rate of adults, i.e. 15 years of age and older. Blood pressure
measurements on children require specialist knowledge! Please consult
your doctor if you wish to measure the blood pressure of a child. Do not
under any circumstances use the unit on a baby/infant.
•
The special double-preformed comfort cuff is designed for a wrist
circumference of 12.5-21.5 cm.
•
The measurement results of automatically measuring blood pres-
sure monitors may be falsified by pregnancy, irregular heartbeat or
arteriosclerosis. Measure your own blood pressure in consultation with
your doctor.
•
Do not under any circumstances place the cuff on or over any critical
point, e.g. wound, aneurysm, etc. Risk of injuries! The supply via an
intravascular access (infusion) might be interrupted.
•
If you have had a mastectomy, do not measure blood pressure on the
side of the body where the breast has been removed together with the
lymph nodes from the armpit.
•
The double-preformed comfort cuff can be easily attached and provides for
a perfect fit during measurement.