15
OTHER FEATURES
SELECTING SENSITIVITY.
The sensitivity is displayed on both Display Screen 1 and 2 as
“S
=.”
The highest sensitivity value is 70, the lowest is 0. To adjust the sensitivity value, the
“S
=” must blink on the display screen.
If it is not blinking:
Click and release the Sensitivity dial and observe which feature is blinking. Keep clicking
until the “S
=” blinks
.
Spin the Sensitivity dial to the right (clockwise) to increase the sensitivity value or to the
left (counter clockwise) to decrease it.
CHANGING STORAGE RECORD NUMBER
To change the storage location before storing a reading:
Click around the screen using the Sensitivity dial until the
record number in the upper right corner blinks.
Spin the Sensitivity dial to the preferred record number.
Click firmly to set; the cursor will move to the function
bar.
If Store Record is showing on the function bar press to store.
If store record is not showing spin until it does show. Then press the Sensitivity dial to
store.
To view data stored in a record number:
Click to the function bar and spin until Display 1 is shown.
Press the Sensitivity dial to select Display 1.
Click the Sensitivity dial until the record number in the
upper right corner blanks
Spin the Sensitivity dial either left or right to view the
record. The decibels will be shown in the middle right of
the screen.
Record number
dB shown here
