4
COMPONENTS
PISTOL HOUSING
The main component of the Ultraprobe 100 is its’
pistol housing.
From back to front,
let us examine each part.
BAR GRAPH DISPLAY.
The display consists of a ten segment LED bar graph that
will indicate ultrasonic signal strength. A low number of LEDs indicate a low level of
ultrasound, conversely more intense ultrasonic signals will display more LEDs.
BATTERY LEVEL LIGHT.
This red light turns on only when the batteries need to
be replaced.
NOTE:
When the trigger on/off switch is pulled to the on position the Battery
Level Light will flicker on and then stay off. This is normal and has no relation
to battery condition.
SENSITIVITY SELECTION DIAL.
There are eight (8)
sensitivity levels
which read out in related decibels of “0” to “70”. As the dial is turned to the
right, to “0”, the sensitivity of the instrument increases. As the dial is turned to
the left, to “70”, the sensitivity decreases. A low
-level ultrasound emission
produces low amplitude. For this reason, the instrument should be in a high
sensitivity position. 0 is the high sensitivity position. 0 is a dB indication of
threshold detection for the instrument. For higher amplitude signals, move the sensitivity to the
left towards “70”.
HEAD SET JACK.
This is where you plug in the headset. Be sure to plug it in
firmly until it clicks. This is a 3.5mm mono jack.
Содержание Ultraprobe 100
Страница 1: ...1 UE SYSTEMS INC THE ULTRAPROBE 100 MANUAL...