IPX/IPN Series
Installation Guide
01A.01
9
4.2. Setting the Lens Position
1) Remove the dome cover to control the positioning buttons, or use web site setup (
Setup >
Video & Audio >Repositioning)
to adjust the camera.
2) Refer to
3. Part Names
for the button locations; to pan, use ‘+’ and ‘–‘pan buttons. To tilt,
use ‘+’ and ‘-‘tilt buttons.
Caution
!
Lifespan of PAN and TILT are approximately good up to 5,000 counts each.
4.3. Setting the Image Attribute
Through the camera’s webpage, users can configure image settings.
The camera image’s brightness, contrast, saturation and sharpness are adjustable through the
image settings. (
Setup > Video & Audio > Camera)
.
Even though the camera can pan 360 degrees,
the recommended “default” front of the
camera housing is described on a right figure.
Please refer to the diagram below for the
proper camera housing position and the
camera lens:
B. Pan the lens with
pan ‘+’ and ‘-‘ buttons
A. Tilt the lens with
tilt ‘+’ and ‘-‘ buttons
PAN & TILT buttons
