IPX/IPN Series
Installation Guide
01A.01
16
6.3. Reset
Refer to
3. Part Names
for the reset button location.
Perform the following procedures to reset your device:
1.
Push the Reset button and hold for 1~2 seconds. The red led lights up.
2.
Wait for the system to reboot.
6.4. Factory Default
Refer to
3. Part Names
for the reset button location.
Resetting the device back to the factory default will initialize all parameters including the IP
address back to the factory defaults. To reset back to the factory default;
1.
Push reset button and hold for 5 seconds.
2.
Release the Reset button when green LED blinks. The red led lights up few seconds later.
3.
Wait for the system to reboot.
The factory default settings can be inferred as follows:
IP address:
192.168.xx.yy
Network mask:
255.255.0.0
Gateway:
192.168.0.1
User ID:
root
Password:
pass
