Flight Operations
Transmitter connect with Drone
Mobile phone connect with Drone
Frequency Pairing
①
Turn on the power.
②
Pull the left stick to the lowest position
and let go, the light goes off slowly.
it indicates the transmitter enters the
frequency state.
③
The drone is placed on the horizontal ground, and long press the power button
for 2 seconds to start the machine. After the navigation light is on for 2 seconds,
the front navigation light flashes and the rear navigation light goes out. At the
same time, the remote control emits a prompt sound of "di", indicating
successful frequency alignment and entering the horizontal calibration of
compass.
horizontal ground
Download and install APP: UDIGPS
This software is suitable for mobile phones in
the IOS and Android system.
For detailed operation, please check the
system “HELP” of APP.
6
