Drone Battery Li-Po Battery Disposal & Recycling
Wasted Lithium-Polymer batteries must not be placed with household
trash. Please contact local environmental or waste agency or the
supplier of your model or your nearest Li-Po battery recycling center.
Method of propeller installation and disassemble
Important Notice
Our company's products are improving all the time, design and specifications are subject to
change without notice.
All the information in this manual has been carefully checked to ensure accuracy, if any
printing errors, our company reserve the final interpretation right.
①
Switching sequence. At first, turn on the power of the transmitter, then turn on
the power of the drone. After the end, turn off the power of the drone first, and
then turn off the power of the transmitter.
②
Improper operation caused the crash. It is necessary to check and confirm the
connection of the motor, blade or electric pool of the aircraft and the damage
degree, so that the aircraft can fly again. If it is damaged, please replace it with
new accessories, otherwise it will easily cause flight accidents.
③
Battery must be removed when the drone is not in use.
Attention
Disassemble
：
Unscrew the screw on both sides of propeller clamp and pull out
propeller assembly.
Installation
：
Place the propeller assembly on the motor shaft, fix it on the motor,
and lock screws on both sides of the propeller clamp.
Note
：
There are marked "A" and "B" on the back of the propeller. Please
carefully check the letters "A" and "B" on the folding arm of the drone.
The two letters must correspond to each other during installation.
14
