While flying, press down the key, the transmitter sounds “di”, drone enters the
function of following.Now it can be controlled by the user.
The function is standard by the mobile phone APP signal, so it’s a must to make the drone and
APP connected normally, turn on the mobile location service at the same time, otherwise this
function is invalid
Following Function
In flight, press the "encricle" button, and the transmitter will make the sound of "di".
Then it goes to the function of encircling flight. The drone will fly to a default radius
then it waits for the direction controlled by the user. Adjust the speed and direction
of the drone by manipulating the right stick. It is the minimum radius of the default
radius acquiescently ,so drone flies only in the sub range.
Encircling flight
Turn left, the drone flies clockwise;
Move further, the flying speed will
become faster.
Go downside to enlarge the radius
of encircling.
In the state of
encircling flying,
the left stick could
only control the
height of the drone.
Go upward to narrow the radius of
encircling.
Turn right, the drone flies
counterclockwise; Move further,
the speed will become faster.
Note: follow the maximum range distance, within 1000m of the take-off point.
10
