Udirc Neon U51, Руководство по эксплуатации

Страница: 9 / 23

www.udirc.com
Drone calibration(After pairing successful)
Push the right stick as picture shown.(Don’t move the left stick before
successful calibration), the drone body light will flash 3 times, indicating
that the drone is calibrating. After successful calibration, the drone lights
will become solid and ready to fly.
Tips: Crashing the drone may cause it imbalanced beyond the level that
can be adjusted by the trimmer button. If this occurs, you can
re-pairing& re-calibrate.
Press the drone power button for about 2 seconds to power on, the LED
indicator changes from flashing to solid light, the drone is pairing
successfully and ready to control. ( Transmitter beep sound)
Pull the Left Stick all the way down to the lowest position and then release.
The Left Stick will back to the middle position automatically. The power
indicator light flashes slowly,
which indicates the transmitter
is ready for frequency pairing.
It’s a must to put the drone
on the horizontal position!
9