Udirc Neon U51, Руководство по эксплуатации

Страница: 7 / 23

www.udirc.com
1. Connect the drone battery with USB cable first and then choose one of
the method as below picture shown to connect with USB plug.
2. The red USB indicator light keeps bright when charging and the light
turns green when fully charged. (When charging, you must power off
the drone first to make sure successful charge.)
Parts installation
Charging Instruction for Drone Battery
* For faster charging, it is recommended to use an adapter with 5V 2A
output current (not included) to charge the battery
When disassemble, hold the propeller and pull out in vertical direction(picture 1).
When assemble, put the propeller hole aim at the motor shaft and press down
( picture 2).
Picture 1 Picture 2
Propeller installation diagram
Power Bank Phone Charger Computer Charging Car Charger
Li-Po Battery Disposal & Recycling
Wasted Lithium-Polymer batteries must not be placed with household trash.
Please contact local environmental or waste agency or the supplier
of your model or your nearest Li-Po battery recycling center.
7