FlexRC Mini Owl, Инструкции по сборке

Страница: 1 / 12

FlexRC Mini Owl - Extreme FPV Proximity Racing Drone - DIY Build Instructions
This guide will walk you through the detailed build steps using the
​
FlexRC Mini Owl Extreme
FPV Racing Drone DIY Kit ​ . The kit contains everything you need to build your Mini Owl except
the radio receiver, which is purchased as an add-on to the kit. In our example, we’ll be using
the Lemon Rx DSMX Satellite Receiver. The instructions also include the installation of an
optional Pololu voltage regulator.
The Mini Owl can be built as a pusher (motors “upside down”) or a standard (motors right side
up) quadcopter. We’re building ours as a standard quadcopter. There is very little difference in
the two builds other than motor directions and prop mounting.
The Kit:
● FlexRC Mini Owl frame with hardware
● Omnibus Mini F3 Flight Controller with OSD
● Tiny 10A 4 in 1 – Cicada – BusyBee2 BLHELI_S ESC
● 1pc of XT30 battery connector
● 1104 6500kv motors
● 2pcs of
​
HQProp 1.9x3x3 Durable 3-Blade Propeller (2CW, 2CCW)
1