background image

Left and right side flying trimmer

During the flight, if the drone tilts left, hold down the left 
stick in the center button, and push the right stick right to 
adjust. Otherwise push left.

Forward / Backward Trimmer

During the flight, if the drone tilts forward, hold down the 
left stick in the center button, and push the right stick 
backwards to adjust. Otherwise push forwards.

Left and right turning trimmer

During the flight, if the drone head rotates left, hold down 
the left stick in the center button, and push the left stick 
right to adjust. Otherwise push left.

Flying Trimmer

Hold down

Hold down

Hold down

Push the left and right stick inward to the 45 degree angle 
simultaneously.

 In standby, unlocked the motor and working.

 In Working, locked the motor and stop rotating.

Unlocking/locking the motor

Note: If the propeller is deformed or damaged, Altitude Hold Mode will fail.

         If the atmospheric pressure is instability or Typhoon weather, Altitude Hold 

         Mode can not work well.

Intelligent flight control system calculates the hovering position, more stable control 
feature, makes it easier for beginners to control. Release the stick, the drone will keep 
hovering automatically to enable single hand operation.

Altitude Hold Mode

Low Battery Alarm

Transmitter: 

When the transmitter in low battery, the transmitter will continues to sound 
"di...di...di......" to remind the user to return home and replace the batteries of the 
transmitter as soon as possible.

Drone: 

When the drone in low battery, the transmitter will continues to sound "di.di.di......" to 
remind the user to return home.

08

Содержание U89S













Отзывы: