DroneTech SPLASH DRONE 3+, Инструкции по калибровке

Страница: 1 / 2

support@dronetech.co.nz www.dronetech.co.nz 09 836 6088
Follow us @nzdronetech @dronetechnz
SPLASH DRONE 3+
Controller Power ON First – Then Drone Second – ALWAYS
Drone Power OFF First – Then Controller Second – ALWAYS
1. ACCELEROMETER CALIBRATION – All Switches UP!

Power on Controller, Then Drone (Hear Beep Tone)

GREEN / R Red D /YELLOW lights should be fast flashing for about 10seconds.

Then change to fast flashing GREEN / Red

Turn “Return Home” Switch down

* Left Stick to Lower Right, Right Stick to Upper Right (AND HOLD)

Drone in calibration mode

Should go fast flashing GREEN / Yellow / Red, Then slow flashing GREEN

Release sticks

First Calibration complete

Power off Drone, then Controller.
2. COMPASS CALIBRATION.

Ensure all SWITCHES UP

Power on Controller, Then Drone (Hear Beep Tone)

Turn “Return Home” Switch down

Left Stick to Lower Left, Right Stick to upper Left

Should be RED, GREEN and YELLOW flash rapidly