www.dronetech.co.nz 09 836 6088
Follow us
@nzdronetech
@dronetechnz
Now in compass calibration mode
Pick up drone hold out (with straight arm) flat (Grey sticker away from you) ; top up
turn full circle to left. CCW
Turn drone upside down still flat turn full circle to left (Grey Sticker Way from you)
CCW
Drone on edge arrows up to 12 o’clock turn full circle to CCW
Drone on edge arrows to 9 o’clock - turn full circle to left CCW
Same again for 6 and 3 o’clock CCW
Place drone on flat surface facing direction of flight.
Lights should still be flashing Green, Yellow, Red
Wait about 90seconds for slow flashing
GREEN, GREEN
.
Now calibrated.
Power off drone to save calibration, power off controller.
3. Testing & START UP
Check ALL SWITCHES UP on controller (GPS Mode)
Power up controller, then Drone (Beep Tone)
Wait for slow GREEN flashing and 11 or more satellites
Check Drop system working & attach line
Unlock Rotors – Left stick to bottom right, Right stick to bottom left – motors on.
Move Right Hand lever up, the2 rear motors should go.
Move Right Hand lever down, the front 2 motors should go
Move Right Hand lever to Left, the right 2 motors should go
Move Right Hand lever to right the left 2 motors should go.
Fit Rotors
Ready to fly
REMEMBER:
NEVER STORE YOUR BATTERIES FULLY CHARGED OR COMPLETELY EMPTY
