● One-click I/M readiness key
● Typical way: select I/M Readiness from Diagnostic Menu
NOTE
●To review I/M Readiness status, make sure that the ignition key is
switched to ON with the engine off.
●Not all monitors are supported by all vehicles.
To retrieve I/M Readiness Status data by one-click I/M readiness key:
Press the One-Click I/M Readiness Key on the keypad and the following
screen displays.
2.Colored LED and build-in beeper provide both visual and audible
reminders for emission check and DTCs. Below is the interpretation of
the LED and build-in beeper.
When the LED is :
● Green - Indicates that engine systems are “OK” and working properly
(the number of Monitors equipped with the vehicle which have run and
performed their self-diagnostic testing is in the allowed range. MIL is off.
).No stored and pending DTCs exist. The vehicle is ready for an
To retrieve I/M Readiness Status data by one-click I/M readiness key:
1.Press the One-Click I/M Readiness Key on the keypad and the
following screen displays.
