12
www.udirc.com
Brief Introduction for Button Functions
High / Medium/Low
Speed Mode
Left Stick
Right Stick
Power Switch
Press down the Left Stick to switch to High /Medium/ Low Speed
Move the Stick to forward / backward / left / right to fly the drone
to up / down / turn left / turn right.
Move the Stick to forward / backward / left / right to fly the drone
to forward / backward / left / right.
Push up the power switch to turn on the transmitter, and pull
down to turn off.
Heading Hold Mode
Press the button to enter heading hold mode, and press again to
exit from heading hold mode.
Trimmer mode
Button
Press down this button,move the right stick to the required trimmer
direction, then it will adjust the direction accordingly, when loose
the stick, then ESC from the trimmer mode.
Take Off / Landing /
Emergency Stop
Button
Press the button and the drone will fly up automatically. Press the
button again and the drone will land on the ground automatically.
Press and hold the button more than 1s, the drone propellers will
stop and fall down immediately.
Open the battery cover on the back side of the transmitter and
put 3 alkaline batteries (AAA, not included) into the box in
accordance with electrode instructions, as picture shown.
Battery installation:
3X1.5V
Alkaline Batteries
Battery Cover
