Compass calibration
Tips: It’s a must to have the right compass adjustment first each time you start
the drone, or it can’t work normally.
Rotate the drone horizontally until the transmitter will sound "di... " , horizontal correction
to complete. When the left navigation light turns to long light and the right navigation light
flashes, enter vertical correction. Rotate the drone vertically until the transmitter will sound
"di... ", vertical correction over. The four navigation lights are spinning and flashing.
Horizontal Correction
Vertical correction
②
Pull the left stick to the lowest position
and let go, the indicator light changed to
slow flash.it indicates the transmitter enters
the frequency state.
Transmitter connect with Drone
Frequency Pairing
①
Turn on the prower,
the transmitter indicator
light will flash quickly.
It must be placed on the horizontal ground
！
③
Press the key of power for two
seconds to start the drone, it makes the
right frequency successfully. Then the
left navigation light keeps shiny, while
the right navigation light is off. Thus
shows that it enters the state of compass
horizontal calibration.
6
