Drone Battery Li-Po Battery Disposal & Recycling
Wasted Lithium-Polymer batteries must not be placed with household
trash. Please contact local environmental or waste agency or the
supplier of your model or your nearest Li-Po battery recycling center.
Note: There are marked "A" and "B" on the
propeller. Please carefully check the
letters "A" and "B" on the arm of the
drone. The two letters must
correspond to each other during
installation. if not, then the drone can
not work normally.
Parts Replacement
Propeller Installation
Alignment screw hole
Disassembly: Turn out the screw, hold
the propeller and pull out the propeller
upward in the direction of the vertical
motor.
Installation: The center hole of the
propeller is aligned with the motor shaft
and pressed down in the direction
perpendicular to the motor. The screw
hole of the propeller corresponds to the
screw hole on the motor shaft. Tighten
the screw.
13
