Ude WX-99, Руководство пользователя

Страница: 2 / 9

PX-99
SF-99
TL1 TL2 TL3 TL4 TL5 TL6
WX-99
9 2 610.532A
rev.
1
USE
IMPORTANT NOTE: To be able to work on READ MODE it is
mandatory to configure the WRITE MODE first.
The equipment provides two operating modes that can be chosen by pressing the button on the frontal panel.
This mode is used to configure the presets and to allow the equipment to choose any of the ten presets saved
and stored in the internal memory. The mentioned configurations are done through the configuration software SF-99 that can
be downloaded from the website.
This mode enables the WX-99 to communicate with the digital preamplifier PX-99 and therefore allow the
volume control and source selection by a third-party equipment through the presets previously configured on the READ
MODE.
MODE
READ MODE:
WRITE MODE:
USB
TLA GND TLB
MIC/AUX 1 MIC/AUX 2 MIC/AUX 3 MIC/AUX 4 MIC/AUX 5 MIC/AUX 6 MIC/AUX 7 MIC/AUX 8 OUT A OUT B
PX-99
SF-99
TL1 TL2 TL3 TL4 TL5 TL6
THIRD PARTY
CONTROLLER
TL1
TL2
TL3
TL4
TL5
TL6
WIRING FOR READ MODE
WIRING FOR WRITE MODE