User Manual V1.4
Date: 2011.02.18
5
No Zigbee manager software necessary. Please power on the adapters by the following
procedures with the same PAN ID and Channel no..
Step 1: Power on the Coordinator and R1 for pairing and power off the other
adapters
Step 2: Power off the Coordinator. Power on the R2 for pairing with R1. Please power
off the other adapters.
Step 3: .The rest may be deduced by analogy to the end device.
If you need to set multi network, please set the different PAN ID, channel no. and short
address from section 8.3 and 8.5.
7.3 One by many: Please check the picture of section 2.2. The coordinator will transmit the data to
the specific devices. The mode will need the short address for data transmission to the
specific destinations.
Remark: There’re two bytes of data which named the short the address in the Zigbee network
assigned by the coordinator. You can set with or without the short address, please check
the section 8.5.
8. Zigbee Manager Software
8.1 Setting the parameters of the devices for all the roles, coordinator, router and end device.
Please plug the adapter with the PC via COM port individually.
8.2 The coordinator will assign the short address to all the routers or end devices when power on
the adapter. The setting will take effect for the adapters which are in the same PAN ID and
Channel.
8.3 If you don’t know the COM port, please check the following procedures.
Configuration
Scan
OK
Open Port
If you know the port number, you can get the parameters via the “Test Port” button.
